MTS Multipurpose Elite - Manual (Page 57)

Now that you have created and run a basic test, you can open one of the more complex test designs that
came with your MTS Acumen system, such as the MTS Acumen Tension test. To open this test, click the
Open Test icon and select MTS Acumen Tension.
When the test is opened, click Procedure in the Explorer tab to examine the test procedure. You will notice
that this test is much more complicated than the simple ramp and cycle test you just created, as it contains
several “nested” parallel path activities, calculations, and DAQ activities. If you want to run the test to
understand what a test operator may experience using this test, click the New Test Run icon, select or add
a specimen, and then click the green Run button.“Acumen Simulation - MTS FlexTest 40”
Multipurpose Elite Test Design Guide 57
5.0 Creating Tests