MTS Multipurpose Elite - Manual (Page 45)

1. Drag a Cycle activity below the Ramp activity.
Adding a Cycle Activity
2. Define Cycle activity properties:
a. Ensure that the Cycle activity is selected.
b. Enter the following values as necessary:
Cycle Activity Properties
Value Property
Cycle at Mean Display Name
Frequency Timing Type
1 Hz Frequency
True Sine Wave Shape
5 Number of Cycles
Interrupt Immediately Advanced...
Relative End Levels
No Compensator Compensator
Axial Channel List
Displacement Control Mode
Multipurpose Elite Test Design Guide 45
5.0 Creating Tests