MTS Multipurpose Elite User Manual
Page 33
Display of MPE Application Resources
Description
Function
Number
When MPE is connected to a station, the window title
shows the controller and station configuration
Controller and Station
Identification
1
associated with the current test. In this example, the
controller name is “Acumen Simulation - MTS
FlexTest 40”, and the station configuration name is
“FT40_station1_Simulation.cfg”.
On Explorer, click Resources. Click a Test Definition
element and click the Resources tab at the top of
the panel.
Resources Tab
Access
2
The resources in the Name column are test
resources. Test resources are required by the test
Test Resources
3
and must map to equivalent resources in the
Controller Resources column when connected to a
controller.
Controller resources represent hardware resources
in the physical station. Resource mapping is saved
with tests.
Controller Resources
4
When connected to a controller, Controller Resources
reflect the resources in the Station Configuration file.
When not connected to a controller, Controller
Resources reflect the resources the MPE application
expects to find when connected to a station.
For More Information
on page 35
Multipurpose Elite Test Design Guide 33
4.0 Working with Resources