MK Diamond MK-101 - Manual (Page 30)

30
MK-101 MaiNTeNaNCe
The following maintenance should be performed Monthly.
(A)
Remove the Diamond Blade
(F)
Verify the Motor Adjustment
Strap is tight
(E)
Verify all motor mounting
Bolts are tight
(B)
Lubricate the Outer Flange
and Retaining-nut
(C)
Lubricate the Inner Flange
(G)
Lubricate the Blade Guard
Pivot Shaft
(H)
Remove the Cutting Head (See
Adjusting the Cutting Head)
MONTHlY MaiNTeNaNCe
(D)
Verify the Roller Wheel
Assembly is tight and in
good condition.
(I)
Lubricate the Cutting Head
Adjustment Knob