Metal Sales Image II Manual - Manual (Page 19)

PIM-19
IMAGE II
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
P
eaK wiTh
f
oam
-C
losUre
d
eTail
image ii r
idge
/h
iP
C
over
d
eTail
Double Bead Tape Sealant
Image II Panel
Moisture Barrier (by others)
1 /
8
" x 3 /
16
" Pop-Rivet (every rib)
Image II Outside Closure
Double Bead Tape Sealant
Image II Panel
Peak
Z-Closure
1 /
8
" x 3 /
16
" Pop-Rivet (3 per panel)
Tube Sealant
Cleat
#8-18 x 3 /
4
" Truss Head Woodscrew (4 per panel)
Double Bead Tape Sealant
Double Bead Tape Sealant
10" Step Ridge/Hip Cover
3:12 Slope
Minimum
3:12 Slope
Minimum
#8-18 x 3 /
4
" Truss Head Woodscrew (1'-0" o.c.)
CAUTION
Additional screws
may be required for
high snow loading
and steep slopes.
CAUTION
Additional screws
may be required for
high snow loading
and steep slopes.
Moisture Barrier (by others)
Note: Z-Closures must be field cut and bent to fit
between panel ribs (see Architectural Manual).