Metal Sales Image II Manual - Manual (Page 18)

PIM-18
IMAGE II
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
e
ndwall wiTh
f
oam
-C
losUre
(r
egleT
) d
eTail
image ii P
eaK wiTh
Z-C
losUre
d
eTail
Fasteners (by others)
Tube Sealant
Double Bead Tape Sealant
Image II Panel
Moisture Barrier (by others)
Pitch Break
Reglet Flashing
1 /
8
" x 3 /
16
" Pop-Rivet (every rib)
Image II Outside Closure
Double Bead Tape Sealant
Double Bead Tape Sealant
Image II Panel
Moisture Barrier (by others)
Peak
Z-Closure
1 /
8
" x 3 /
16
" Pop-Rivet (3 per panel)
Tube Sealant
Cleat
#8-18 x 3 /
4
" Truss Head Woodscrew (4 per panel)
3:12 Slope
Minimum
3:12 Slope
Minimum
CAUTION
Additional screws
may be required for
high snow loading
and steep slopes.
CAUTION
Additional screws
may be required for
high snow loading
and steep slopes.
#8-18 x 3 /
4
" Truss Head Woodscrew (1'-0" o.c.)
Note: Z-Closures must be field cut and bent to fit
between panel ribs (see Architectural Manual).