Putting into operation, 1 connecting the appliance, 2 switching on – Memmert Universal ovens U plus, Incubators I plus, Sterilisers S plus User Manual
Page 22: Caution, 400v appliances, No one can trip over it, It does not come into contact with any hot parts, Abb. 12 switch on appliance, Uf 110
22
D24026 | Date 10/2014
Putting into operation
4. Putting into operation
Caution:
The first time the appliance is operated, it must not be left unattended until it has reached
the steady state.
4.1 Connecting the appliance
Caution:
Observe the country-specific regulations when making connections (e.g. in Germany DIN
VDE 0100 with residual current circuit breaker). Observe the connection and power rat-
ings (see nameplate and Technical data on page 14). Make sure to establish a safe PE
conductor connection.
Lay the power cable so that
►
it is always accessible and within reach so it can be disconnected quickly in the event of
failure or emergencies;
►
no one can trip over it;
►
it does not come into contact with any hot parts.
230/115-V appliances:
230/115-V appliances:
Plug the provided power cable into the rear of the appli-
ance and connect it to a CEE 7/4 socket (Abb. 10).
400V appliances:
400V appliances:
The power cable is permanently installed. Connect the
plug to a 400 V CEE coupling (Abb. 11).
4.2 Switching on
Switch on the appliance by pressing the On/Off switch
on the front of the appliance ( Abb. 12 ).
The starting process is shown by three animated white
dots
. If the dots have another colour, an error has
. If the dots have another colour, an error has
occurred (see page 38).
After the first start-up, the appliance display is set to
English by default. You can change the language as
described from page 41. However, to get a basic
overview of operating the appliance, you should read
the following chapter first.
Abb. 10 Power connection
230/115 V
Abb. 11 400 V CEE connection
Hauptschalter
>
Zu der Typenbezeichnung gibt es momentan drei Entwurfsrichtungen,
ich kann Ihnen noch nicht sagen, ob Memmert hierzu schon eine Entscheidung
getroffen hat.
Die hier gezeigt Variante, ist die von uns empfohlene Richtung.
UF 110
PLUS
ON
344
.4
444
4
.
TEMP
Set
°C
°C
FLAP
40
%
TIMER
h
d
10
02
End
Sept.
29
22 24
FAN
%
0
%
100
ALARM
max
444
.4°C
auto
+/-
0.0
K
min
444
.4°C
O
O
ON
N
N
N
O
O
N
O
Manu
44.Sept
Abb. 12 Switch on appliance