Memmert ICH/ ICH L Climate chambers - Manual (Page 44)

44 D30381 | Date 10/2014
Menu mode
All other settings can be made accordingly. The settings possible are described in the follow-
ing sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance automati-
cally returns to the main menu and restores the former values.
7.3 Setup
7.3.1 Overview
In the SETUP display, you can set the following parameters:
►
the IP address and Subnet mask of the appliance’s Ethernet interface (for connection to Subnet mask Subnet mask
a network)
►
the Unit of the temperature display (°C or °F, see page 45)
►
how the digital backwards counter with target time setting works ( Timer mode , see page
46
►
the type of the slide-in unit (grid or shelf, see page 46)
►
the defrosting system ( Defrost , see page 46)
►
Remote control (see page 40)
►
Gateway (see page 40)
If the Setup menu contains more entries than can be
If the Setup menu contains more If the Setup menu contains more
displayed, this is indicated by the display “1/2”. This
means that there is a second “page” of entries.
To display the hidden entries, use the turn control to scroll
beyond the lowest entry. The page display changes to “2/2”.
7.3.2 IP address and subnet mask
If you want to operate one ore more appliances in a net-
work, each appliance must have its own unique IP address for identification. By default, each
appliance is delivered with the IP address 192.168.100.100.
LAN 1: 192.168.1.233
192.168.1.216
LAN 2: 192.168.1.215 LAN 3: 192.168.1.241
Editor Programmname Simulation Protokoll
- + - +
INP 250 Test 01 180 .0°C i
HPP 250 Labor
i 37 .0°C 44 .4%rh
5 5 STAND BY
Programm n e g n u l l e t s n i E l l o k o t o r P t ä r e G e f l i H n e k c u r D AtmoCONTROL
Fig. 24 Operation of several appliances in a network (schematic example)
Setup
Unit
IP adress 255.145.136.225
Subnet mask 255.255.0.0
Alarm Temp
°C F
Timer mode
TWW TWB
1/2