Memmert HPP, Peltier-cooled incubators IPP plus Constant climate chambers - Manual (Page 12)

12 D24030 | Date 10/2014
Construction and description
2.6.2 Communication interfaces
The interfaces are intended for appliances which meet the requirements of IEC 60950-1.
USB interface
The appliance is fitted by default with a USB
interface in accordance with the USB specifi-
cation. This way, you can
►
transfer software stored on a USB stor-
age medium to the appliance (see page
55).
►
export protocol logs from the appliance
to a USB storage medium (see page
57).
►
transfer user ID data stored on a USB storage medium to the appliance (see page 58).
The USB port can be found on the right side of the ControlCOCKPIT (Fig. 4).
Ethernet interface
Via Ethernet interface, the appliance can be
connected to a network, so that you can
transfer programmes created with Atmo-
CONTROL software to the appliance and read
out protocol logs. The Ethernet interface is
located on the rear of the appliance (Fig. 5).
For identification purposes, each appliance
connected must have its own unique IP ad-
dress. Setting the IP address is described on
page 45 .
You will find a description of how to transfer programmes via Ethernet in the en-
closed AtmoCONTROL manual.
With an optional USB to Ethernet converter, the appliance can be directly connected to a com-
puter / laptop (see Optional accessories on page 16).
Fig. 4 USB interface
Fig. 5 Ethernet interface