Lenze 931W - Manual (Page 6)

Preface and general information
About this Manual
1

6 HB 13.0001-EN 3.0
1 Preface and general information
With ”fluxx”, Lenze offers a program for the comfortable commissioning, parameter
setting and diagnostics of the Fluxxtorque 931 M and 931 W drive series.
The software described in this Manual is provided with the following functional range:
ƒ Controlled commissioning via drive-specific dialogs for 931 M and W servo inverters.
ƒ Parameter setting with a direct connection to the controller.
ƒ Automatic drive identification for operation with a serial interface.
ƒ Communication via RS232 serial interface.
ƒ Simplified troubleshooting by diagnostics functions.
ƒ
Monitor window for representing all required drive parameters that are updated
cyclically.
ƒ PC parameter set storage in the PC for archiving or for service applications.
ƒ Complete parameter set transfer between the PC and controller by using one
command.
ƒ Printout of the parameter settings for purposes of documentation.
ƒ Saving/loading the drive configuration for an exchange between different
computers.

Note!
The software also is available in English.
1.1 About this Manual
Target group
This Manual addresses to all persons who carry out dimensioning, commissioning and
settings of servo inverters of the 931 series.
Together with the catalogue, it forms the basis for project planning for the mechanical
engineer and system engineer.
Contents
The System Manual complements the Mounting Instructions included in the scope of
supply:
ƒ The features and functions are described in detail.
ƒ It provides detailed information on possible applications.
ƒ Parameter setting is clarified by means of examples.
ƒ In case of doubt, the supplied Mounting Instructions are always valid.