This manual is valid for, What is new, what has changed – Lenze 931W User Manual

Page 2



HB 13.0001-EN 3.0

This Manual is valid for 931M/W servo inverters
ƒ The 931 W inverter is used for separate mounting.
ƒ The 931 M inverter is an integrated motor inverter. The motor, the electronics, the feedback, and

possibly the brake is integrated into the system.

What is new, what has changed ?

Material No.

Version

Description

13142788

3.0

06/2006

TD31

First edition

Important note:

Software is provided to the user ”as is”. All risks regarding the quality of the software and any results obtained from its use

remain with the user. The user should take appropriate security precautions against possible maloperation.

We do not accept any responsibility for direct or indirect damage caused, e.g. loss of profit, loss of orders or adverse

commercial effects of any kind.

All trade names listed in this documentation are trademarks of their respective owners.

No part of this documentation may be reproduced or made accessible to third parties without written consent by Lenze GmbH &

Co KG Kleinantriebe.

All information given in this documentation has been selected carefully and complies with the hardware and software described.

Nevertheless, deviations cannot be ruled out. We do not take any responsibility or liability for damages which might possibly occur.

Necessary corrections will be included in subsequent editions.

This manual is related to the following products:

931M