3 configuration with internal dip switches, Configuration with internal dip switches – Lenze EMZ9374IB User Manual

Page 58

background image

Commissioning

Configuration with internal DIP switches

7

l

58

EDBMZ9374X DE/EN/FR 4.2

7.3

Configuration with internal DIP switches

)

Note!

ƒ

Disconnect the 3−pin terminal board of the system bus (CAN) from
the terminal extension when you are in the operating and
programming mode. This avoids errors on the system bus.

ƒ

Maintain the prescribed setting sequence to avoid errors during
configuration!

Setting sequence:
1. Settings in the programming mode
2. Settings in the operating mode (normal operation)

–

Addressing of the terminal extension

–

Number of terminal extensions used

–

Setting the CAN bus baud rate

See also other documents in the category Lenze Hardware: