Lenze E84AZESR Mains filter-RFI filter 42-96A - Manual (Page 48)

Electrical installation
Important notes
6
l
48 EDK84AZESxx DE/EN/FR/ES/IT 4.0
(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ Destruction of the device if the mains voltage is too high.
Protective measures:
ƒ Observe the maximally permissible mains voltage.
ƒ Fuse the device correctly on the supply side against mains
fluctuations and voltage peaks.
(
Stop!
Dangerously high temperatures
The filter is not protected against mains phase failure. In the event
of a mains phase failure, the filter may become very hot.
Possible consequences:
ƒ Destruction of the device.
ƒ Smouldering or open fire.
Protective measures:
ƒ Change the setting for code C00565 from "Warning" to "Fault" or
ƒ select a wiring for the bMctrlMainsFault status output
(LS_DeviceMonitor) system block which causes the system to
shutdown within one minute if said output is set to HIGH.