Blodgett MT3240E/G - Manual (Page 2)

BLODGETT OVEN COMPANY
50 Lakeside Avenue, Burlington, VT 05402
Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183
MODEL MT3240E/G
SHORT FORM SPECIFICATIONS
Provide Blodgett conveyor model MT3240(G/E) conveyor oven. Unit shall be (gas fired/electrically heated) and shall cook by means of forced, heated air. Unit shall be (single/dou-
ble/triple) deck supported by (specify stand type from options list). Each deck shall be fully independent, of stainless steel construction, and fully insulated on all sides. Provide with
(electronic spark ignition gas fired/electrically heated) baking compartment with two blowers to evenly distribute heat across baking zone. Conveyor belt shall be 32" (815mm) wide and
constructed of stainless steel wire mesh; baking zone length shall be 40" (1015mm). Unit shall be provided with solid stainless steel side loading door. (End mounted/remote) control
panel shall be solid state with 600°F (315.5°C) maximum thermostat and digital display of adjustable belt speed. Provide start-up inspection service by a factory authorized service
agent. Provide options and accessories as indicated.
DIMENSIONS:
Floor space 54" (1370mm) W x 72" (1825mm) L
Product clearance 3.3" (85mm)
Combustible wall clearance 2" (50mm) gas and electric
Belt width
Standard belt 32" (815mm)
Optional twin belt 16" (405mm) each
Baking zone length 40" (1015mm)
POWER SUPPLY (must have dedicated ground)
MT3240E
V.A.C. Hz Phase K.W.H. Amperes
L1 L2 L3 N
DOMESTIC
208 60 3 24 67 67 67 -
240 60 3 24 58 58 58 -
INTERNATIONAL
220/380 50 3N 24 39 39 39 -
240/415 50 3N 24 34 34 34 -
CE MODEL
230/400 50 3N 24 33 33 33 -
This oven contains a mercury relay. DO NOT put mercury relay in trash.
Relay must be recycled or disposed of as hazardous waste.
MT3240G
DOMESTIC
3-wire with Neutral, 5 amp. 120/208-240 VAC, 1 phase, 60 Hz.
INTERNATIONAL
4 amp. 220/240 VAC, 1 phase, 50 Hz, 2 wire with ground
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of
components without prior notice
33.5”
(850mm)
40” (1015mm)
TOP VIEW
54”
(1370mm)
72” (1825mm)
16”
(405mm)
GAS
INPUT
END VIEW
3/4” NPT
GAS INPUT
3.3” (85mm)
PRODUCT CLEARANCE
48” (1219mm)
or 36” (914mm)
Flexible Gas Hose
Available
SIDE VIEW
43.5” (1105mm)
32.5” (825mm)
23.5” (595mm)
0
SIDE VIEW
57.5” (1465mm)
46.5” (1185mm)
37.5” (955mm)
26.5” (675mm)
17.5” (445mm)
0
SIDE VIEW
66.5” (1700mm)
55.5” (1420mm)
46.5” (1190mm)
35.5” (910mm)
26.5” (680mm)
15.5” (400mm)
6.5” (170mm)
0
APPROVAL/STAMP
P/N M9991 Rev D (4/00)
GAS SUPPLY: (specify) Natural Propane
Single 3/4" NPT 3/4" NPT
Double stack 1" NPT 3/4" NPT
Triple stack 1" NPT 1" NPT
MAXIMUM INPUT:
MT3240G MT3240E
Single 100,000 BTU/hr 24 KW
Double 200,000 BTU/hr 48 KW
Triple 300,000 BTU/hr 72 KW
Minimum Gas Pressure: 4.5" W.C. for natural gas
11.0" W.C. for propane gas
Maximum Gas Pressure: 10.5" W.C. for natural gas
13" W.C. for propane gas
MINIMUM ENTRY CLEARANCE:
Uncrated 21" (533mm)
Crated 32" (813mm)
SHIPPING INFORMATION:
Approx. Weight: Crated Uncrated
Single 850 lbs. (385 kg) 750 lbs. (340 kg)
Double 1700 lbs. (770 kg) 1500 lbs. (680 kg)
Triple 2550 lbs. (1155 kg) 2250 lbs. (1020 kg)
Crate sizes:
32" (813mm) x 70" (1778mm) x 105" (2667mm)