Brother MFC 9560CDW - Manual (Page 99)

Routine maintenance
83
A
Resetting the drum counter
A
When you replace a drum unit with a new
one, you need to reset the drum counter by
completing the following steps:
a
Press Menu, 8, 4.
b
Press a or b to choose Drum. Press OK.
c
Press 1 to reset the drum unit counter.
d
Press Stop/Exit.
Replacing the belt unit
A
Order No. BU-300CL
A new belt unit can print approximately
50,000 Letter or A4 size single-sided pages.
Replace Belt
A
When the following message appears on the
LCD, you need to replace the belt unit:
Replace Parts
Belt Unit
IMPORTANT
• DO NOT touch the surface of the belt unit.
If you touch it, it could degrade print
quality.
• Damage caused by incorrect handling of
the belt unit may void your warranty.