Brother MFC 9560CDW - Manual (Page 62)

Chapter 7
46
Search
7
You can search alphabetically for names you
have stored in the One Touch and Speed Dial
memories. (See Storing One Touch Dial
numbers on page 47 and Storing Speed Dial
numbers on page 48.)
a
Press b Search.
b
Press the dial pad key for the first few
letters of the name. (Use the chart on
Entering text on page 161 to help you
enter letters.)
Press OK.
c
Press a or b to scroll until you find the
name you are looking for.
Press OK.
d
Press Black Start or Color Start.
Note
• If you do not enter a letter and press OK in
step b, all registered names will appear.
Press a or b to scroll until you find the
name you are looking for.
• If the LCD shows No Contact Found
when you enter the first few letters of the
name, it means that a name for the letter
is not stored.
Fax redial
7
If you are sending a fax manually and the line
is busy, press Redial/Pause, wait for the
other fax machine to answer, and then press
Black Start or Color Start to try again. If you
want to make a second call to the last number
dialed, you can save time by pressing
Redial/Pause and Black Start or
Color Start.
Redial/Pause only works if you dialed from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial one time after five minutes.