Leica Biosystems VT1200/VT1200 S - Manual (Page 33)

31 Leica VT1200 / VT1200 S
5. Working with the Instrument
Key / setting dial Semiautomatic sectioning mode Automatic sectioning mode
1
2

Rotary knob 2
The feed rate (FOR/REV) for the
"Blade forward" and the "Blade
back" keys can be set between
1 and 5 mm/s in 0.5 mm/s incre-
ments with rotary knob 1.
ditto
1
2

Rotary knob 2
Switches the vibration movement
(FOR/VIB) of the "Blade forward"
key either on or off using rotary
knob 1.
ditto
1
2

Rotary knob 2
Key acknowledgment (BEEP) on
or off with rotary knob 1.
ditto
Save the parameter and leave by
pressing the menu MENU key.
Leaving the menu and
saving the parameter is
possible at any point in
the menu.
ditto
If you want to call up the parameters of a certain user (for example, user 3), press the Menu
key and select user 3. Then confirm by pressing the Menu key 2x. The parameters stored under
user3 are now enabled.