Landoll SCPH-33 Subsoil Chisel Plow - Manual (Page 12)

1001 7K299
18
15
11
13
12
14
13
8
17
9
7
3
2
4
18
20
23
22
21
4
17
2
3
12
13
10
11
16
19
1
Page 10
8J310
1. DO NOT LUBRICATE, ADJUST OR REPAIR WHEN MACHINE IS IN MOTION. 2. DO NOT TOW OR TRANSPORT FASTER THAN 15 MILES PER HOUR. 3. DO NOT RIDE OR ALLOW OTHERS TO RIDE ON THE MACHINE. 4
.
BLOCK UP ALL HYDRAULICALLY OR MECHANICALLY RAISED COMPONENTS
T
O
PREVENT UNINTENDED LOWERING OR LOWER THE MACHINE TO THE GROUND TO MAKE ADJUSTMENT OR REPAIRS WHEN NOT IN USE.
5. KEEP ALL PERSONS AWAY FROM MACHINE DURING HITCHING AND OPERATING. 6. SLOW DOWN BEFORE MAKING SHARP TURNS OR USING THE BRAKES.
DRIVE SLOWLY OVER ROUGH GROUND, SIDE HILLS, AND AROUND CURVES TO AVOID TIPPING.
7. COMPLY WITH ALL LAWS WHEN TRANSPORTING THE MACHINE ON PUBLIC ROADWAYS. 8. INSTRUCT ALL OPERATORS IN THE SAFE OPERATION OF THE MACHINE.
REVIEW THE OPERATOR’S MANUAL FOR CORRECT PROCEDURES.
9. BLOCK IMPLEMENT TO PREVENT MOVEMENT WHEN UNHITCHED FROM TRACTOR.
10.
KEEP ALL GUARDS AND SHIELDS IN PLACE WHILE MACHINE OR PARTS ARE IN MOTION.
CAUTION
!
!
24
CAUTION
DEEP TILL OPERATION CAN DAMAGE UNDERGROUND UTILITIES CAUSING DANGEROUS CONDITIONS AND DISRUPTING SERVICES. DETERMINE THE DEPTH AND LOCATION OF BURIED CABLES, PIPE LINES, AND DRAIN TILES BEFORE OPERATION.
8K829
rev2-10-04