Brother MFC 1970MC - Manual (Page 74)

66
C H A P T E R E I G H T
ICM Recording Monitor
This feature lets you adjust the speaker volume for voice messages you monitor as
they come in. You can select LOW, MEDIUM, or HIGH, or you can turn the
monitor OFF so you will not hear messages as they come in.
1 Press Function , 6 , 4 .
2 Use or to select LOW, MEDIUM, HIGH, or OFF.
3 Press Set when the screen displays your selection.
4 Press Stop to exit.
Recording a Memo
A memo is stored and played as a voice message.
1 Press Record .
2 When the display prompts you to pick up the handset, speak into the handset
to record your memo. Your recording can be as long as the Incoming
Message Maximum Time. (
Function , 8 , 5 )
3 Press Stop or replace the handset when you’re finished.
Recording a Conversation
You can record a telephone conversation by pressing Record during the conversa-
tion. Your recording can be as long as the Incoming Message Maximum Time.
You and the other party will hear a beep every 15 seconds while recording. You
cannot record a conversation using the Speaker Phone.
Press Stop to exit.
Paging/Fax Forwarding
When Paging is set to ON, your FAX/MFC dials the pager number you’ve pro-
grammed, and dials your Personal Identification Number (PIN) when connected,
to activate your pager and let you know you have a fax or voice message in the
Message Center memory.
When Fax Forwarding is set to ON, your FAX/MFC dials the fax machine phone
number you’ve programmed, and forwards any faxes you’ve received.
You cannot use Paging and Fax Forwarding at the same time.