Brother MFC 1970MC - Manual (Page 48)

40
C H A P T E R S I X
One Touch Dialing
1 Pick up the handset—OR—Press Speaker Phone .
2 When you hear a dial tone, press the One Touch key of the location you want
to call.
If you try to use a One Touch location with no number stored in it, you hear
a warning sound, and the screen displays NOT REGISTERED. The display
returns to normal after 2 seconds.
Speed Dialing
1 Pick up the handset—OR—Press Speaker Phone .
2 When you hear a dial tone, press Speed Dial , then press the two-digit
Speed Dial number.
3 To hang up, replace the handset—OR—Press Speaker Phone .
Hold
1 Press Hold to put a call on Hold.
2 You can put down the handset without disconnecting the call.
3 Pick up the FAX/MFC handset to release the call from Hold. Picking up an
extension handset will not release the call from Hold.
Pause
Press Redial/Pause to insert a 3.5 second pause between numbers.
Tone/Pulse
If you have pulse dialing service, but need to send tone signals (for telephone
banking, for example), follow the directions below. If you have touch tone service,
you do not need this feature to send tone signals.
1 Lift the handset.
2 Press . Any digits dialed after this send tone signals.
3 When you hang up, the FAX/MFC returns to pulse dialing service.
See
Storing One
Touch Dial
Numbers
pp. 20-21
See
Storing
Speed Dial
Numbers
p. 22