Brother MFC 1970MC - Manual (Page 30)

22
C H A P T E R T H R E E
Storing Speed Dial Numbers
You can store Speed Dial numbers, when you dial by pressing only three keys. Model
MFC 1870MC has 36 Speed Dial locations, Models FAX 1570MC and MFC 1970MC
have 100. Even if you lose electrical power, numbers stored in memory will not be
lost.
1 Press Function , 4 , 2 . The screen prompts you to enter a location.
SPEED-DIAL? #
2 Use the dial pad to enter a 2-digit location. (For model MFC 1870MC, enter 01
- 36.) (For models FAX 1570MC and MFC 1970MC, enter 00 - 99.)The screen
displays your entry, then prompts you to enter the number you’re storing.
#05
ENTER & SET
3 Enter the number (up to 20 digits).
4 Press Set . The screen now prompts you to store a name with this number.
NAME:
5 Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 19 to help you enter letters—OR—Press
Set and go to Step 7
to store the number without a name.
6 Press Set .
7 The screen prompts you to select the type of number this is. Use or to
select the type you want.
FAX a fax number
TEL a telephone (voice) number
F/T both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing.
8 Press Set .
9 Return to Step 2 to store another Speed Dial number—OR—Press Stop to exit.
Speed Dialing
1 Pick up the handset—OR—Press Speaker Phone .
2 When you hear a dial tone, press Speed Dial , then press the two-digit
Speed Dial number.