KD Scientific Allegro Peristaltic Pump Series - Manual (Page 60)

60 K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Operating the KDS Allegro Peristaltic Pump System
FRATE
Sets or displays the dispensing rate. Configuration Run
screen mode only. The rate argument may be replaced
by “max” or “min” to set the maximum or minimum rate,
respectively. “lim” may be used to display the range
limits.
Command format:
frate [max|min|lim|{rate} {rate units}]
Query response:
[##:]# xl/xxx
[##]
or:
[##:]# xl/xxx to # xl/xxx
[##]
RRAMP
Sets or displays the dispensing (reverse) rates while
ramping. Configuration Run screen mode only.
Command format:
rramp [{start rate} {end rate} {rate units}
{ramp time in seconds}]
Query response:
[##:]Ramp not set up.
[##]
or:
[##:]# xl/xxx to xl/xxx in # seconds
[##]
RRATE
Sets or displays the dispensing (reverse) rate.
Configuration Run screen mode only. The rate argument
may be replaced by “max” or “min” to set the maximum
or minimum rate, respectively. “lim” may be used to
display the range limits.
Command format:
rrate [max|min|lim|{rate} {rate units}]
Query response:
[##:]# xl/xxx
[##]
or:
[##:]# xl/xxx to # xl/xxx
[##]
Volume commands
CFVOLUME
Clears the dispensed volume in forward direction.
Configuration Run screen mode only.
Command format:
cfvolume
CTVOLUME
Clears the target volume. Configuration Run screen
mode only.
Command format:
ctvolume
CVOLUME
Clears all volumes. Configuration Run screen
mode only.
Command format:
cvolume
CRVOLUME
Clears the dispensed (reverse) volume. Configuration
Run screen mode only.
Command format:
crvolume
FVOLUME
Displays the dispensed (forward) volume.
Configuration Run screen mode only.
Command format:
fvolume
Query response:
[##:]# xl
[##]
✐
NOTE: To clear a ramp, use CTTIME
command.