KD Scientific Allegro Peristaltic Pump Series User Manual
Page 20
20
K
D
S
A
lle
g
ro
P
e
ri
s
ta
lt
ic
P
u
m
p
S
y
s
te
m
U
s
e
r’s
M
a
n
u
a
l
phone
508.429.6809
fax
508.893.0160
web
www.kdscientific.com
KD Scientific Allegro Peristaltic Pump System User’s Manual
Publication 5613-004-REV-A
Configuring the KDS Allegro Peristaltic Pump System
Target Volume/Time Selection
1. In the
Configuration Display
enter the target
volume or time. In this example we want a
volume of 5 L.
2. To change the units, press the units.
3. In the
Units Selection Display
select the
volume units.
Flow Direction
1. The flow direction is set on the Run screen. Press
the Run Preview button on the Configuration
screen to enter the Run screen.
2. On the Run screen select the Reverse Direction
button to run the flow in the reverse (counter
clockwise) direction or select the right Forward
Direction button to run the flow in the forward
(clockwise) direction.
✐
NOTE: For time enter h:m:s. or press
again to select secs. Time is accurate to
+/- 0.01secs. Remember to enter the :
Press to select target volume
Press to select target time
Press to change the units
Press Here
Reverse
Direction
button
Forward
Direction
button