KD Scientific Legato 130 Series - Manual (Page 53)

53
Operating the KDS Legato 130
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D
FTSWITCH
Sets or displays the footswitch setting. The footswitch
may be used in a toggle on or off mode (momentary), a
press to run mode (falling), or a release to run mode
(rising).
Command format:
ftswitch [mom|rise|fall]
Query response:
[##:]Momentary
[##]
or:
[##:]Active high
[##]
or:
[##:]Active low
[##]
POLL
Sets or displays the polling mode state. In polling mode,
prompts are inhibited if they aren’t generated by a typed
command. Valid states are on or off.
Command format:
poll [on|off]
Query response:
[##:]OFF
[##]
or:
[##:]ON
[##]
TILT
Calibrates the tilt sensor.
Command format:
tilt
Query response:
[##:]Calibrating the tilt sensor...
[##:]Tilt calibration value is #
[##]
SYRMANU
Sets or displays the syringe manufacturer. Configuration
Run screen mode only. Valid 3-character manufacturer
codes are shown in the table below:
Typing ‘syrm’ with no arguements displays the current
syringe setting.
Typing ‘syrm ?’ displays a list of manufacturers with their
associated 3-letter code.
Typing ‘syrm {code} ?’ shows a list of syringe sizes
associated with the specified manufacturer.
Command format:
syrm [?|{3 char code}?|{volume}ul|ml]
Query response:
[##:]{manufacturer}, {diameter} mm
[##]
or:
[##:]Custom, {diameter} mm
[##]
or:
[##:]{code}, {diameter} mm (this line is
repeated for each syringe manufacturer)
[##]
or:
[##:]{volume}, {unit} (this line is repeated for
each syringe size)
[##]
VER
Displays the short version string.
Command format:
ver
Query response:
[##:]KDS Legato 130 #.#.#
[##]
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
hm1 Hamilton 700, Glass
hm2 Hamilton 1000, Glass
hm3 Hamilton 1700, Glass
hm4 Hamilton 7000, Glass
sge SGE (Scientific Glass Engineering)