Product overview – KD Scientific Legato 130 Series User Manual
Page 10

10
Product Over view
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D
The KD Scientific Legato 130 is the next generation
of syringe pumps. The series offers unparalleled ease
of use through the high resolution color touch screen user
interface. The full touch screen interface enables the user
to quickly create configurations and recall them for easy
use. The TFT color display presents all the pump
operating parameters on an easy to view run screen.
The password feature prevents accidental configuration
changes ensuring the programs integrity is retained.
Programs can also be set to be started on a time delay
for unattended operation.
An led light on the front panel makes it easy to see if the
pump is running. Once the pump starts to run, the display
shows the pump is running and the LED turns on. This will
make it easy to see the pump’s status.
The pumps are versatile and can be interconnected through
the RS485 interface. Up to 99 pumps can be linked
together through the RS485 interface. This interface is easy
to use provided each pump is assigned its own unique
pump address.
For limited laboratory space the Legato 130 control box
can be placed on its side to reduce the footprint by 55%.
The display also tilts with the change to allow the user
operate the pump vertically.
Notifications and error messages are displayed for the
user to acknowledge, eliminating any guesswork about
problems.
Flow performance is optimized with a small step angle
stepping motor that drives a precision lead screw and
pusher block. The syringe mechanism is easy to use and
securely holds the syringes for smooth flow performance.
Advanced microstepping techniques are employed to
further reduce the step angle to eliminate flow pulsation.
The accuracy is ±0.5% with 0.05% reproducibility. A
wide dynamic flow range can be programmed into the
pump. Flow rates are selectable with user selected
engineering units from ml, µl, nl pl, and hours, minutes
and seconds.
Up to 5 kg (11 lbs) of linear force is available. This force
is user adjustable to ensure the right force is applied for
the various syringe sizes..
phone
508.429.6809
fax
508.893.0160
web
www.kdscientific.com
Product Overview