KD Scientific Legato 130 Series User Manual
Page 15

15
Product Over view
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D
SYRINGE LOADING
phone
508.429.6809
fax
508.893.0160
web
www.kdscientific.com
1.
Raise the spring loaded syringe clamp and rotate to the side, away from the syringe barrel.
2.
On the control box, use the Fast Forward / Fast Reverse buttons to adjust the pusher block to the
approximate length of the syringe.
3.
Unscrew the thumbscrew located on the back of the pusher block allowing enough room for
the syringe plunger.
4.
Place the syringe on the syringe rest, ensuring that the barrel flange is positioned within its
capture and plunger rests in the pusher block.
5.
Tighten the thumbscrew on the back of the pusher block until the syringe plunger is secure
within the pusher block.
6.
Lift and rotate the syringe clamp, placing it on the syringe barrel to secure the syringe in place.
Syringe Clamp
Pusher Block
(Plunger Capture)
Barrel Flange Capture
Legato 130 Injector unit showing important controls for syringe loading
Syringe Rest
Thumbscrew