JUMO 706030 LOGOPRINT 500 Printing Recorder Data Sheet - Manual

Page 1/12
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address: 36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
E-mail: [email protected]
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail: [email protected]
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
E-mail: [email protected]
Internet: www.jumousa.com
Data Sheet 706030
2013-01-29/00355277
Printing recorder with text printing and
24-character LED dot-matrix display
Brief description
The printing recorder is equipped with 3 or (optionally) 6 measurement inputs, which are
electrically isolated from one another. The evaluation of the measurement traces of the
printing recorder can be assisted by extensive text printing. The recorder can be pro-
grammed either by using the 8 keys on the front of the instrument or through a PC setup
program.
Thermocouples, resistance thermometers, resistance transmitters, potentiometers, volt-
ages or currents (standard signals) are possible as input signals. The appropriate lineari-
zations are carried out automatically, but can also be adapted to customer-specific
linearizations with the help of the PC setup program.
Further outstanding features of the LOGOPRINT 500, which are already included in the
basic version, are four open-collector outputs for signaling infringements of limits and
faults, eight event traces, as well as peak value recording.
The color assignments (measurement traces and texts) are freely programmable via the
PC setup program, which is available as an accessory.
Overview of functions
Analog inputs
(configurable and
isolated) 3 or 6 inputs for:
- thermocouples
- resistance thermometers
- resistance transmitters
- potentiometers
- voltage and current
8 logic inputs available as extra code
Outputs - 4 open-collector outputs
available as extra code:
- interface for 8 relay outputs
- supply for 2-wire transmitter
Recording - measurement traces
- text printing
- event traces
Setup interface for configuration and parameter setting via PC
RS422/RS485 interface extra code for the data transfer from and to the recorder
Supply voltage - 110 — 240V AC +10/-15%, 48 — 63Hz
- 20 — 53V AC/DC ±0%, 48 — 63Hz
Features
k Limit monitoring
k Event traces
k Four open-collector outputs
k Peak value recording
k Extensive text printing
k Statistics (report) with minimum,
maximum and mean values
k Event- and time-controlled chart speed
k Math and logic module
(PC setup program is required)
k Universal chart cassette
Type 706030
Approvals/marks of conformity
(see Technical data)