Bosch HBN 1312.0 A - Manual (Page 23)

23
Note:
Enamel is baked on at very high temperatures. This
can cause some slight colour variation. This is normal
and does not affect the function. Do not use coarse
scouring pads or strong cleaning agents to remove
such discolorations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
AntiĆcorrosion protection is guaranteed.
It is best to clean the glass cover with washingĆup
liquid.
The glass panel on the oven door can be removed to
assist in cleaning.
1.
Remove the oven door and lay it on a cloth with
the handle underneath.
2.
Unscrew the cover on top of the oven door. Turn
the screws clockwise or antiĆclockwise with a coin
to do this. (Fig. A)
3.
Slide out the panel. (Fig. B)
Clean the glass panel with glass cleaner and a soft
cloth.
4.
Push the panel back in. Make sure that the
smooth surface is facing outwards.
5.
Replace the cover and screw it back on.
6.
Refit the oven door.
The oven must not be used again until the panel
has been correctly installed.
Cleaning the glass cover
for the oven light
Cleaning the glass
panels