Brother FAX-1820C - Manual (Page 78)

6 - 7 SETUP SEND
Fax Resolution
You can use the Fax Resolution key to change the setting
temporarily (for this fax only). In fax mode, press Fax Resolution
and or to select the setting you want, and then press
Menu/Set .
—OR—
You can change the default setting.
1
If it is not illuminated in green, press ( Fax ).
2
Load your document. (See Load documents on page 2-1.)
3
Press Menu/Set , 2 , 2 , 2 .
4
Press or to select the
resolution you want.
Press Menu/Set .
5
Press 1 if you want to choose more settings and the LCD will
return to the Setup Send menu.
—OR—
Press 2 if you have finished choosing settings.
6
Enter a fax number.
Press Mono Start or Colour Start .
Standard Suitable for most typed documents.
Fine Good for small print and transmits a little
slower than Standard resolution.
S.Fine Good for small print or artwork and transmits
slower than Fine resolution.
Photo Use when the document has varying shades
of gray or photograph. This has the slowest
transmission time.
2.Fax Resolution