Brother FAX-1820C - Manual (Page 52)

4 - 5 GETTING STARTED
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your fax can be connected to most types of PABX. The
recall facility on the machine supports timed break recall only (TBR),
PABX normally can work with this for gaining access to an outside
line, or for transferring a call to another extension: The feature works
when the
Tel/R key is pressed with Shift key.
Setting PABX
If the machine is connected to a PABX system, set PBX to On . If not,
set it to Off .
1
Press Menu/Set , 0 , 5 .
2
Press or to select On (or
Off ).
Press Menu/Set .
3
Press Stop/Exit .
You can program a Tel/R keypress as part of a number stored
in a One-Touch or Speed-Dial location. When programming the
One-Touch or Speed-Dial number (Function menu 2-3-1 or
2-3-2) press
Tel/R first with Shift (the screen displays "!"), then
enter the telephone number. If you do this, you do not need to
press
Tel/R with Shift each time before you dial using a
One-Touch or Speed-Dial location. (See Storing numbers for
easy dialling on page 7-1.)
However, if PBX is set to Off , you cannot use the One-Touch
or Speed-Dial number that the Tel/R key press is programmed
into.
5.PBX