Brother FAX-1820C - Manual (Page 17)

INTRODUCTION 1 - 3
1 One-Touch keys
These 5 keys give you instant
access to 10 previously stored dial
numbers.
2 Shift (MFC-3220C only)
To access memory locations 6
through to 10 in the One-Touch
keys hold down the Shift key.
2 Shift (FAX-1820C only)
To access memory locations 6
through 10 in the One-Touch keys
or Report Menu in the Ink/Reports
key, or lets you place telephone
calls on hold, hold down the Shift
key.
3 Copy keys
(Temporary settings):
Options
You can quickly and easily select
temporary settings for copying.
Quality
Use this key to temporarily change
the quality for Copying.
4 Fax and telephone keys:
Redial/Pause
Redials the last number you called.
It also inserts a pause in auto dial
numbers.
Tel/R (MFC-3220C only)
This key is used to have a telephone
conversation having picked up the
external handset in F/T
pseudo-ringing etc. Also, use this
key to recall the operator or transfer
a call to another extension when it is
connected to a PABX.
Tel/Mute/R (FAX-1820C only)
Lets you place telephone calls on
hold. Also, This key is used to have
a telephone conversation having
picked up the external handset in
F/T pseudo-ringing etc. Also, use
this key pressing with Shift key to
gain access to an outside line
and/or to recall the operator or
transfer a call to another extension
when it is connected to a PABX.
Fax Resolution
Sets the resolution when you send a
fax.
5 Dial Pad
Use these keys to dial telephone
and fax numbers and as a keyboard
for entering information into the
machine.
The # key lets you temporarily
switch the dialling mode during a
telephone call from Pulse to Tone.
6
Stop/Exit
Stops an operation or exits from the
menu.
7
Mono Start
Lets you start sending faxes or
making copies in black and white.
Also for MFC-3220C, lets you start a
scanning operation. (Colour or
mono, depending on the scanning
setting on your PC)