JUMO 706585 LOGOSCREEN fd Recorder with stainless steel front Installation Instructions - Manual (Page 35)

35
6 Technical data (extract from data sheet)
Input for DC voltage, DC current
Transducer short circuit/break
Basic range Accuracy
a
a
The linearization accuracy refers to the maximum measuring range. The linearization accuracy is reduced
with short spans.
Input resistance
-12 to +112 mV
-10 to +210 mV
-1.5 to +11.5 V
-0.12 to +1.12 V
-1.2 to +1.2 V
-11.2 to +11.2 V ±100
V
±240
V
±6 mV
±1 mV
±2 mV
±12 mV
R
E
 1 M
R
E
 470 k
R
E
 470 k
R
E
 470 k
R
E
 470 k
R
E
 470 k
Shortest span 5mV
Range start/end freely programmable within the limits in 0.01 mV steps
-1.3 to +22 mA
-22 to +22 mA ±20
A
±44
A
burden voltage
 3 V
burden voltage
 3 V
Shortest span 0.5mA
Range start/end freely programmable within the limits in 0.01 mA steps
Overrange/underrange according to NAMUR NE 43
Sampling cycle Channel 1 to 18: 125 ms in total
Input filter 2nd order digital filter; filter constant adjustable from 0 to 10.0 sec
Electrical isolation see “Electrical data” on page 37 and
“Overview of the electrical isolation” on page 20
Resolution >14 bit
Short-circuit
a
a
Programmable reaction of device, e.g. triggering alarm
Break
a
Thermocouple not detected detected
RTD temperature probe detected detected
Resistance transmitter not detected detected
Potentiometer not detected detected
Voltage
 ±210 mV
not detected detected
Voltage > ±210 mV not detected not detected
Current not detected not detected