beautypg.com

4 electrical connection – JUMO 706585 LOGOSCREEN fd Recorder with stainless steel front Installation Instructions User Manual

Page 18

background image

4 Electrical connection

18

Ground the instrument via the PE terminal of the power supply connector.
The cross-section of this cable must be the same as that of the supply
cable.

Do not connect any additional loads to the supply terminals of the
instrument.

Electromagnetic compatibility (EMC) conforms to the standards and
regulations cited in the technical data.

v Chapter 6 “Technical data (extract from data sheet)”

Inductive loads close to the instrument, such as contactors or solenoid
valves, should have RC modules fitted for interference suppression.