JUMO 706585 LOGOSCREEN fd Data Sheet User Manual
Page 5
2012-07-31/00586136
Data Sheet 706585
Page 5/21
JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone:
+49 661 6003-0
Fax:
+49 661 6003-607
E-mail:
Internet:
www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax:
+44 1279 635262
E-mail:
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
8 Technology Boulevard
Canastota, NY 13032, USA
Phone: 315-697-5866
1-800-554-JUMO
Fax:
315-697-5867
E-mail:
Internet: www.jumousa.com
Screen
Electrical data
RS232 for barcode reader (connector 2)
Qty. 1
•
protocol
Modbus master, Modbus slave and barcode reader
•
baud rate
9600, 19200, 38400
•
connector
SUB-D
•
external inputs
via the Modbus master/slave function, 24 analog and 24 binary
Ethernet (connector 6)
•
quantity
max. 1
•
protocols
TCP, IP, HTTP, DHCP, SMTP, ModbusTCP
•
baud rate
10 Mbits/sec, 100 Mbits/sec
•
connector
RJ45
•
data format
HTML
USB host (connector 5)
•
quantity
2 (or 1 with stainless steel front),
connector 5 and front connector (not with stainless steel front); no parallel operation
•
use
for connecting a memory stick
•
max. current
100 mA
USB device (connector 15)
•
quantity
2 (or 1 with stainless steel front),
connector 15 and front connector (not with stainless steel front); no parallel operation)
•
use
for connecting to the (master) computer
Resolution/size
320 × 240 pixels/5.5"
Type/number of colors
TFT color screen/256 colors
Screen refresh rate
> 150 Hz
Brightness setting
adjustable on instrument
Screen saver (switch-off)
through waiting time or control signal
Supply voltage (switch-mode PSU)
AC 100 to 240 V +10/-15%, 48 to 63Hz or AC/DC 20 to 30 V, 48 to 63Hz (ELV)
Electrical safety
to EN 61010, Part 1, August 2002
overvoltage category II, pollution degree 2
Protection class I
terminal for PE conductor
Test voltages (type test)
•
mains supply circuit to meas. circuit
with AC supply: 2.3 kV/50 Hz, 1 min,
with AC/DC supply: 2.3 kV/50 Hz, 1 min
•
mains supply circuit to housing
(protective conductor)
with AC supply: 2.3 kV/50 Hz, 1 min,
with AC/DC supply: 2.3 kV/50 Hz, 1 min
•
measuring current circuits to
measuring current circuit and housing
500 V/50 Hz, 1 min
•
electrical isolation between analog inputs
up to 30 V AC and 50 V DC
Supply voltage error
< 0.1 % of range span
Power consumption
approx. 40 VA
Data backup
CompactFlash memory card
Electrical connection
•
mains supply and relays
at rear through pluggable screw terminals, 5.08 mm raster,
max. conductor cross-section
2.5 mm
2
or 2× 1.5 mm
2
with ferrules
•
analog and binary inputs
at rear through pluggable screw terminals, 3.81 mm raster,
max. conductor cross-section
1.5 mm
2