JUMO 705030 mTRON T - Digital Input/Output Module Operating Manual - Manual (Page 26)

4 Electrical connection
26
4.3.2 Digital input
The connection depends on the configuration (input or output).
4.3.3 Digital outputs
The connection depends on the configuration (input or output).
Connection Input Terminals Symbol and terminal designation
Apply signal DC 0/24 V to ter-
minals 1 to 12
Ground reference via GND ter-
minal required!
1
2
3
4
5
6
7
8
9
10
11
12 1 and GND
2 and GND
3 and GND
4 and GND
5 and GND
6 and GND
7 and GND
8 and GND
9 and GND
10 and GND
11 and GND
12 and GND 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
GND
Or:
Switch DC 24 V from terminal
+24 V to terminals 1 to 12 via
floating contact.
External voltage supply
DC 24 V via terminals +24 V
and GND required!
1
2
3
4
5
6
7
8
9
10
11
12 1 and +24 V
2 and +24 V
3 and +24 V
4 and +24 V
5 and +24 V
6 and +24 V
7 and +24 V
8 and +24 V
9 and +24 V
10 and +24 V
11 and +24 V
12 and +24 V +24 V
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
U
+
-
x
Connection Output Terminals Symbol and terminal designation
Output signal:
DC 0/24 V / maximum 500 mA
External voltage supply
DC 24 V via terminals +24 V
and GND required!
1
2
3
4
5
6
7
8
9
10
11
12 1 and GND
2 and GND
3 and GND
4 and GND
5 and GND
6 and GND
7 and GND
8 and GND
9 and GND
10 and GND
11 and GND
12 and GND 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
GND
U
+
-
x