JULABO SC 2500w Eco-Series Recirculating Coolers - Manual (Page 37)

Recirculating Cooler
37
1. Press the button until the desired menu item is displayed.
2. Press enter to indicate the parameter.
3. Set value:
Use the cursor keys to move left or right on the display until
the numeral you wish to change blinks.
Use the increase/decrease arrows
to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
4. Press enter to store the selected value.
Optimization instructions for the PID control parameters:
optimum setting
°C
t
The heat-up curve reveals inappropriate control settings.
Inappropriate settings may produce the following heat-up curves:
Xp too low
°C
t
Tv/Tn too low
°C
t
Xp too high or Tv too high
°C
t
Tv/Tn too high or Xp too high
°C
t