Intelix DIGI-44B - Manual (Page 5)

DIGI-44B Installation Guide
Overview
The Intelix DIGI-44B is a four input by four output HDBaseT HDMI matrix switcher. The Intelix DIGI-44B
matrix improves the ease of installation compared to previous Intelix HDMI matrix switchers.
The DIGI-44B has dual outputs on each output port, allowing the same signal to be routed to the HDMI
connector and a remote destination with an HDBaseT receiver. The HDBaseT ports support 1080p HDMI
video with audio, bi-directional wide-band IR, matrix control via IR and HDCP compliance. The matrix is
HDMI compatible and supports up to 2K resolutions, Deep Color and full 3D capabilities.
The DIGI-44B can be controlled via front panel buttons, front panel IR, external IR, remote IR through
HDBaseT extenders, RS232 and Ethernet. The matrix includes a simple IR remote control to allow IR
switching. This IR remote control can be learned into universal remotes and IR based control systems.
The matrix also features a full command set for RS232 and Ethernet control with third party control
systems.
Package Contents
Please verify the following items are in the shipping box prior to installation of the DIGI-44B.
1 ea. DIGI-44B 4 Input 4 Output HDBaseT Matrix Switcher
4 ea. DIGIB-EYE IR Receivers
4 ea. DIGIB-EMT IR Transmitters
1 ea. IR Extension Cable
1 ea. 12VDC Power Supply
1 ea. Power Cable
1 ea. USB to Serial Adapter
1 ea. Infrared Remote Control with Battery (CR2025 3V)
2 ea. Rackmount Ears
6 ea. Rackmount Ears Mounting Screws
1 ea. DIGI-44B Installation and Operation Guide
5