Intelix DIGI-44B - Manual (Page 17)

DIGI-44B Installation Guide
5. Select “Use the following IP address”, and then enter the
IP address you would like your computer to become.
Then select “OK”
6. Open the Docklight Configuration File
7. Confirm the Docklight communication settings
(Docklight -> Tools -> Project Settings) match
the DIGI-44B. *Note – add a colon and the
number [23] after the IP address you enter to
signify the communication port.
.
8. Start Communication.
9. Turn the power to the DIGI-44B on – after 5 seconds, the DIGI-
44B will send some lines of information you can see in the
communications window. This confirms that you are
communicating properly.
17