INFICON BPG402-SP ATM to Ultra-High Vacuum Gauge (Profibus) User Manual

Page 20

tira47e1 (2005-08) BPG402SPv1.cp

Manufacturer Exception Detail 0 is set to "1", if there is an internal communication
error in the gauge.

The following parameters are copies of the ID 27 and ID 28. They are
used only if you want to access these parameters by the parameter
channel.

This parameter corresponds to the Common Exception Detail Alarm of the
Exception Detail Alarm (ID 27).

This parameter corresponds to the Device Exception Detail Alarm Byte 0 … 3 of
the Exception Detail Alarm (ID 27).

This parameter corresponds to the Manufacturer Exception Detail Alarm Byte 0 of
the Exception Detail Alarm (ID 27).

This parameter corresponds to the Common Exception Detail Warning Byte 0 of
the Exception Detail Warning (ID 28).

This parameter corresponds to the Device Exception Detail Warning Byte 0 … 3 of
the Exception Detail Warning (ID 28).

This parameter corresponds to the Device Exception Detail Warning Byte 4 of the
Exception Detail Warning (ID 28).

This parameter corresponds to the Manufacturer Exception Detail Warning Byte 0
of the Exception Detail Warning (ID 28).

Manufacturer Exception
Detail Warning 0

3.1.1.13 Copy Common Exception

Detail Alarm 0
ID 204

3.1.1.14 Copy Device Exception

Detail Alarm 0 … 3
ID 205

3.1.1.15 Copy Manufacturer

Exception Detail Alarm 0
ID 207

3.1.1.16 Copy Common Exception

Detail Warning 0
ID 208

3.1.1.17 Copy Device Exception

Detail Warning 0 … 3
ID 209

3.1.1.18 Copy Device Exception

Detail Warning 4
ID 210

3.1.1.19 Copy Manufacturer

Exception Detail
Warning 0
ID 211