INFICON MPI-16 Crucible Indexer - Manual (Page 17)

MPI-16 & MPI-16H POCKET INDEXERS
Package Contents 2-1
2 Package Contents
Carefully inspect your MPI-16 Indexer and its shipping container for evidence of possible
shipping damage or loss. If such evidence is present, a report should be filed with the
carrier as soon as possible. Keep the shipping container as evidence if shipping damage
is present or for possible future return of the unit. Check the material received against the
packing list to be certain that all material is accounted for. The following items should
have been included with your Indexer:
1 MPI-16 Pocket Indexer and mounting bracket
1 Operation Manual
1 Power Supply
1 Power cord
1 I/O cable (DSUB-25 Female to open-ends, 5 feet long)
1 Interlock Connector, (2-Pin terminal block)
Optionally, your package may also include the following items:
1 Remote Panel
1 DSUB-25 Female to DSUB-25 Male Cable
If you have purchased a INFICON MDC-360 Film Deposition Controller with your MPI-16
Pocket Indexer, the following cable may have also been included, as an option.
1 DSUB-25 Female to DSUB-37 Female
This cable has a set of pre-defined I/Os to ease your wiring for I/O connections between
the two units. All you have to do is to configure your indexer for your crucible, and
program the MDC-360 to drive the indexer. See Section 4.2.5.
2.1 Ordering Information
Part Number Description
614800 MPI-16 Operation Manual
614410 1” Hole Mounting Bracket
614209 I/O Cable, DSUB-25 Female to open-ends, 5 feet
long
800401 Mounting Screw, #8-32 x ¼” long
803337 Washer, Int/Ext Tooth, #8
803081 Power Cord
885077 Interlock Connector
900038 Power Supply
828011 Cable, DSUB-25 Female to DSUB-25 Male
614208 Cable, DSUB-25 Female to DSUB-37 Female
Refer to INFICON’s Price List for more accessories and other products.