INFICON MPI-16 Crucible Indexer - Manual (Page 15)

MPI-16 & MPI-16H POCKET INDEXERS
General Description 1-5
1.3.7 Physical
Dimensions [w]
× [h] × [d]
(including shaft length and
protruded switches and
connectors)
4.00”
Ч 5.29” Ч 4.19”
(10.2 cm
× 13.44 cm × 10.64 cm)
Weight 4.2 lbs. (1.9 kg)
Power Supply 48 VDC, 1.1 A, Desktop type
Input Power Requirements 100-250 VAC, 1.5 A at 47-63 Hz.
Mounting Bracket (included) Mounts to a 1” rotary motion feed through,
accommodates base plate thickness of 1/2” to 1-1/8”.
1/4” diameter for the MPI-16
Output Shaft Size
5/16”diameter for the MPI-16H
1.4 Specifications – Remote Panel
1.4.1 Displays
16 Green LEDs Indicating current pocket position
Red Fault LED Indicating a fault
Green In Position LED Indicating a selected position is reached.
1.4.2 Controls
Auto-Manual Toggle Switch Selecting the operating mode.
Pocket Select Rotary Switch Selecting the desired pocket position (Manual Mode)
Speed Select Rotary Switch Selecting the desired sweep for “banana” pocket
(Manual Mode)
Abort/Reset Button Use to stop the indexer operation or to reset the
indexer.
1.4.3 Physical
Dimensions [w]
× [h] × [d]
(Including protruded switches
and connectors)
4.72”
Ч 3.47” Ч 2.00” (11.99 cm × 8.81 cm × 5.08
cm)
(Mounts in a 3.5” quarter panel)
Pocket Select Rotary Switch Selecting the desired pocket position (Manual Mode)
Speed Select Rotary Switch Selecting the desired sweep for “banana” pocket
(Manual Mode)
Abort/Reset Button Use to stop the indexer operation or to reset the
indexer.