INFICON CI-100 Crucible Indexer - Manual (Page 22)

2 - 6
IP
N 07
4-
54
4-
P1
B
CI-100 Crucible Indexer Operating Manual
2.7 BCD I/O Connector
The BCD I/O connector controls pocket selection by decoding the pocket select
information on three inputs.
NOTE: Select Switch #5 must be on (up) to use this connector.
17 Unused
18 Unused
19 Unused
20 Unused
21 Unused
22 Unused
23 Unused
24 Unused
25 Unused
Table 2-1 Binary I/O Connector (continued)
Pin Signal
Table 2-2 BCD I/O Connector
Pin Signal
1 Input: Pocket Select Bit 0
2 Input: Pocket Select Bit 1
3 Input: Interlock (ground to allow movement between pockets)
4 Output: Pocket Ready Contact A
5 Output: Pocket Ready Contact B
6 Ground
7 Input: Pocket Select Bit 2
8 Ground
9 Ground