HYDAC HDA 5500-0-2-DC-006 (CM1k) - Manual (Page 2)

HDA 5500 for HLB 1000 and CS 1000
- 2 -
CONTENTS
1 Introduction 3
1.1 European standards compatibility 3
2 Safety instructions 3
3 Functions 3
4 Operating keys 4
5 Selecting and displaying the unit of measurement 4
6 Installation and commissioning 5
6.1 Mechanical installation 5
6.2 Electrical connection 5
6.3 Supply voltage 6
7 Programming 7
7.1 Adjusting the basic settings 7
7.2 Overview of basic settings menu 8
8 Connecting the Oil Condition Sensor HLB 1000 / Contamination Sensor
CS 1000
17
8.1 HDA 5500 and Oil Condition Sensor HLB 1000 17
8.2 HDA 5500 and Contamination Sensor CS 1000 17
9 Digital display 18
9.1 Standard display 18
9.2 Special display 18
9.3 Sequential analogue output of the HLB 1000 19
9.4 Sequential analogue output of the CS 1000 20
10 Output response 21
10.1 Analogue output 21
10.1.1 Analogue output set to 4 .. 20 mA 21
10.1.2 Analogue output set to 0 .. 10 V 21
10.2 Switching outputs 22
10.2.1 Switching mode 22
10.2.1a) Switch point and hysteresis (SP) 22
10.2.1b) Switching window (Win) 22
10.3 Connection of up to four switching outputs 23
11 Adjusting switch points and hystereses 24
11.1 Switching outputs 24
11.2 Switching window 24
12 Programming enable 25
12.1 Altering the operating programming enable 25
12.2 Altering the main programming enable 26
13 Technical specifications 27
14 Model code HDA 5500 28
15 Unit dimensions 29
16 Electrical connections 30
17 Error messages 31
18 HYDAC Service 31