HYDAC HDA 5500-0-2-DC-006 (CM1k) - Manual (Page 11)

HDA 5500 for HLB 1000 and CS 1000
- 11 -
Menu point Setting Setting range Default setting
Decimal place for display of temperature (dEc.T.)
Decimal place(s) when displaying measured values of
temperature
0 .. 0.000
0.0
Lower display range of temperature (LOr.T.)
Lower limit of the display range
of temperature
-999..9899
-25.0
Upper display range of temperature (Hir.T.)
Upper limit of the display range of
the temperature
-899..9999
100.0
Background lighting for the unit label for temperature
(uni.T.)
Lighting behind unit label is switched on
Lighting behind unit label is switched on
on
oFF
oFF
Allocation of the analogue output to signal (ouT.S)
the analogue output displays rel. change in
viscosity
the analogue output displays rel. change in
dielectric constant
the analogue output displays rel. humidity
the analogue output displays temperature
r.ViS.
r.diE.
r.HuM.
TEMP.
r.ViS.
Output signal (ouT.M)
4..20 mA output signal
0..10 V output signal
MA
VoLT
VoLT
Software version (VErS)
Displays the software version (for reference only)
To close basic settings (End)
Basic settings menu closes. Changed settings are
saved.
Basic settings can still be altered
YES
no
no