HYDAC HDA 5500-0-2-DC-006 (CM1k) - Manual (Page 14)

HDA 5500 for HLB 1000 and CS 1000
- 14 -
Menu point Setting Setting range Default setting
Primary display (PriM)
Value which is normally displayed:
Measured value Channel 1
Lowest value Channel 1
Peak value Channel 1
Measured value Channel 2
Lowest value Channel 2
Peak value Channel 2
Measured value Channel 3
Lowest value Channel 3
Peak value Channel 3
Measured value Channel 4
Minimum value Channel 4
Peak value Channel 4
Status of CS 1000 (see Point 9.3)
Channel 1
Channel 2
Channel 3
Channel 4
Channel 1
Channel 2
Channel 3
Channel 4
Channel 1
Channel 2
Channel 3
Channel 4
Channel 1
Channel 2
Channel 3
Channel 4
STAT.
Channel 1
Reset time (r.TiM)
Indicates how long in seconds the last peak / lowest value is
displayed for
0 .. 3.600 s
0
Decimal place for display of channel 1(dEc.1.)
No. of decimal place/s for the displayed measured value of
channel 1
0 .. 0.000
0.0