HiRO H50188 - Manual (Page 60)

58
WLAN ADSL2+ Router
9.5 Configuring UPnP
From the Site Map in the main menu, click UPnP under Access Managemen to display the
screen shown next.
The following table describes the labels in this screen.
LABEL DESCRIPTION
UPnP
Select this checkbox to activate UPnP. Be aware that anyone could use a
UPnP application to open the web configuration's login screen without
entering WLAN ADSL2+ Router's IP address (although you must still enter
the password to access the web configuration).
Auto configured
Select this check box to allow UPnP-enabled applications to automatically
configure WLAN ADSL2+ Router so that they can communicate through
WLAN ADSL2+ Router, for example by using NAT traversal, UPnP
applications automatically reserve a NAT forwarding port in order to
communicate with another UPnP enabled device; this eliminates the need
to manually configure port forwarding for the UPnP enabled application.
Apply Click Apply to save your settings back to home screen.