Wlan adsl2+ router – HiRO H50188 User Manual

Page 43

Text mode
Original mode

WLAN ADSL2+ Router

DDNS

Go to Access Management -> DDNS to setup your DDNS parameters. Dynamic DNS allows
you to update your dynamic IP address with one or many dynamic DNS services. So anyone
can access your FTP or Web service on your computer using DNS-like address.

LAN Configuration

Go to Interface Setup -> LAN. The 'LAN Settings' option enables you to configure the LAN
port.
If the DHCP Relay is selected, the DHCP requests from local PCs are forward to the DHCP
server runs on WAN side. To have this function working properly, disable the NAT to run on
router mode only, disable the DHCP server on the LAN port, and make sure the routing table
has the correct routing entry.