Wlan adsl2+ router – HiRO H50188 User Manual

Page 22

Text mode
Original mode

WLAN ADSL2+ Router

5. Please enter the “ESSID” and Wireless “Default Channel” if you want to change (the

default settings Network= Enable, ESSID = TW263R4, Default Channel=6).

6. Choose the Encryption type if necessary, as Off – No Encryption (Default) / 64 Bit

Encryption / 128 Bit Encryption / Wi-Fi Protected Access (TKIP) / Wi-Fi Protected Access2
(AES-CCMP) and WPA Mixed Mode. For example, you choose the WPA Mixed Mode type
and configure Passphrase.

7. Please

click

“Setup” button, when the procedure is completed, it will start to configure the

device for a while.