HiRO H50188 - Manual (Page 10)

8
WLAN ADSL2+ Router
4.2 Installation & Setup
Follow each STEP carefully and only go to the next step once you have completed the
previous STEP.
Connection of WLAN ADSL2+ Router
If you have an ISDN telephone line connect the modem router as shown below:
1. Connect the supplied RJ45 Ethernet cable from your PC's Ethernet port to any of the 4
WLAN ADSL2+ Router's LAN Ports.
2. Connect the supplied RJ11 telephone cable from your home's telephone jack to the “LINE”
port of the supplied splitter. Connect another RJ11 telephone cable to the “MODEM” port
of the splitter and connect the other end of this cable to the LINE port of your WLAN
ADSL2+ Router. (If there is no option Splitter, please connect the supplied RJ11 telephone
cable from your home's telephone jack to the “LINE” port of your WLAN ADSL2+ Router.)
3. Connect a RJ11 telephone cable to the “PHONE” port of the splitter and connect the other
end to your telephone.
4. Connect the power adapter to the power inlet “POWER” of the WLAN ADSL2+ Router and
turn the “ON/OFF SWITCH” switch of your WLAN ADSL2+ Router on.