HiRO H50188 - Manual (Page 47)

45
WLAN ADSL2+ Router
WDS Settings
Wireless Distribution System uses wireless media to communicate with other APs, like the
Ethernet does. To do this, you must set these APs in the same channel and set MAC address
of other APs which you want to communicate with in the table and then enable the WDS.
Here are descriptions of every setup items:
Item Name Description
WDS Mode Check this box to enable WDS function,uncheck it to disable WDS.
Mac Address #1
Mac Address #2
Mac Address #3
Mac Address #4
Configure up to four MAC Address of peer Access point to do WDS.